Email This

2021 Other 7203-38OF: For Sale

Print This
Equipment Specifications
Year 2021
Make Other
Model 7203-38OF
Price 475000.00 USD
Location Fargo North Dakota USA
Serial # P-7-20-3-566-21
Condition
Stock # E00061561
Hours 0
Detailed Description

Category For Sale, Status On Yard, Class Used, Available Immediately

Notes
  • PORTABLE 7›¼À™ X 20›¼À™ 3 DECK SCREEN PLANT WITH (3) CROSS CONVEYORS AND 42" FEED CONVEYOR:7›¼À™ X 20›¼À™ - 3 JCI DECK SCREEN 50 HP 1200 RPM TEFC.COIL SPRINGS4FT PANELSSIDE TENSIONED BOTTOM DECKJCI BASE FRAME3 AXLECARRIER:18" WF BEAM 60#.HUTCH 61" SPAN EQUALIZING SUSPENSION.22 500# STANDARD FORGE AXLES 11:00R X 22.5 TIRES.AIR BRAKES LED BRAKE LIGHTS LED MARKER LIGHTS LED STROBE LIGHT REFLECTOR TAPE AND MUD FLAPS.60" X 29- UNDER SCREEN CONVEYOR; 20 HP TEFC:42" SPACING ON CEMA C IDLERS.SEW RIGHT ANGLE DRIVE TYPE ›¼ÀœE›¼À BEARINGS.VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY.3 PLY BELT 3/16 X 1/16 COVER.VULCANIZED SPLICE.SUPERIOR EXTERRA BELT SCRAPER.1/4" PLATE UNDER SCREEN HOPPER WITH WEAR STRIPS & ADJUSTABLE SKIRT BOARD WIPERS.HEAVY DUTY 12" WF SUPPORT STAND UNDER SCREEN.(2) 30" X 12- CROSS CONVEYORS FOR 1ST & 2ND DECK. (1) 24" X 12›¼À™ FOR3RD DECK:7.5 HP TEFC MOTORS WITH SEW RIGHT ANGLE DRIVES.CHANNEL INSET IDLERS.VULCANIZED LAGGED HEAD PULLEY AND SELF CLEANING WING TAIL PULLEY.DODGE SCM BEARINGS.2 PLY 3/16" COVER BELT 3 PLY ON 1ST DECK CONVEYOR.VULCANIZEDSPLICES.SELF CLOSING SAFETY GATE AT LADDER OPENING. 42" FEED CONVEYOR WITH OPTIONAL ADJUSTABLE FEED HEIGHT; 20 HP:SEW RIGHT ANGLE DRIVE.CLOSE SETTING IMPACT IDLERS IN FEED AREA THEN 36" C/C FOR CEMA C CIT IDLERS.DODGESCM BEARINGS. 3 PLY BELT WITH 1/4›¼À COVER.VULCANIZED LAGGED HEAD PULLEY AND SELF-CLEANING WING TAIL PULLEY.5- RECEIVING HOPPER WITH ADJUSTABLE WIPERS & FULL-LENGTH SKIRT BOARD.PPI IMPACT SYSTEM IN LIEU OF IMACT IDLERS IN LOADZONE.VULCANIZED SPLICE.AR LINED PRODUCTS DISCHARGE CHUTES.20" FOLD DOWN WALK WAYS BOTH SIDES OF SCREEN 48" BACK PLATFORM TOE BOARDS 42" TUBESTEEL HANDRAILS AND ACCESS LADDER.SAFETY GUARDS SANDBLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH COATS OF PAINT INCLUDED.OTHER INCLUDED OPTIONS:FAB TEC PLANT MOUNTED 48K RUN-ON SYSTEM:5 X 24" CYLINDERS 48 000 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK CIRCUIT.DELTA HPX-200 12-VOLT POWERUNIT.(1) SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY.CYLINDER MOUNTING PLATES & HARDWARE.HEAVY DUTY FOOT PADS. SELF CONTAINED HONDA 8 HP HYD. POWER PACKAGE ~VS~ HPX 200 12V:ELECTRIC START.12 GALLON HYDRAULIC RESERVOIR WITH FILTER PROTECTION.2 1/2 GPM PUMP.HYDRAULIC LIFT AT HEAD END OF FEED CONVEYOR:TO LIFT CONVEYOR FOR SCREEN CLOTH INSTALLATION & MAINTENANCE.HYDRAULIC LIFT AT TAIL END OF FEED CONVEYOR:PIN LOCATIONS AT DIFFERENTLEVELS.1/3 ›¼À“ 2/3 PANEL STYLE BLENDING 1ST TO 2ND AND 2ND TO 3RD DECK:VULCANIZE SPLICE ON ALL CONVEYORS.42›¼À SUPERIOR EXTERRA BELT SCRAPER ~VS~ STANDARD COMBI-WIPE:60›¼À SUPERIOR EXTERRA BELT SCRAPER ~VS~ STANDARD COMBI-WIPE:SEW KA77 7.5 HP RIGHT ANGLE DRIVE ~VS~ CONVENTIONAL DRIVES ON ALL CROSS CONVEYORS:INCLUDES TYPE ›¼ÀœE›¼À BEARINGS ON HEAD PULLEY.SEW KA97 20 HP RIGHT ANGLE DRIVE ~VS~ CONVENTIONAL DRIVE:INCLUDES TYPE ›¼ÀœE›¼À BEARINGS ON HEAD PULLEY.TOOL BOX MOUNTED ON CHASSIS:RUBBER DISC RETURNS ~VS~ STEEL CANS ON ALL CONVEYORS: PROVISION FOR SLIDE-IN REJECT CONVEYOR:SIMPLY FLAT BAR STYLE.CONVEYOR NOT INCLUDED.TIE OFF CABLES INSTALLED ON BOTH ENDS OF SCREEN SUBFRAME:FAB TEC IS NOT RESPONSIBLE IF TIE OFFS DON›¼À™T MEET MSHA CODEORANGE GUM RUBBER FLASHING ON ALL CONVEYORS3 PLY BELT ON UNDERSCREEN CONVEYOR.PROVISION FOR SLIDE IN REJECT CONVEYORAES ELECTRICAL SWITCHGEAR FOR A 7203-38OF SCREEN PLANT:- 400 AMP MAIN WITH OPERATOR - UPPER RH- 50 HP SCREEN- 20 HP UNDERSCREEN- 7.5 HP CROSS 1- 7.5 HP CROSS 2- 7.5 HP CROSS 3- 20 HP FEED CONVEYOR- 20 HP SPARE1 - WIRED TO 60 AMP HUBBELL RECEPTACLE- 20 HP SPARE 2 - WIRED TO 60 AMP HUBBELL RECEPTACLE- 5 HP STARTER WITH A PIGTAIL AND 20 AMP CONNECTOR - SIRC- 100 AMP FEED BREAKER - WIRED WITH 100 AMP HUBBELL RECEPTACLE- 5 KVA TRANSFORMERMOUNTED ACROSS FEET OF PANEL STAND- 120 VAC 20 AMP CONVENIENCE RECEPTACLE - WEATHERPROOF- LOW PROFILE PANEL STAND- DRIP SHIELD- SWITCHGEAR SETS ON GROUND FOR OPERATION- SITS OVER FINES CONVEYOR FOR TRANSPORT- HOUR METER MANUAL SAFETY START UP HORN E-STOP ALL BUTTONS IN THE DOOR- 100- OF MAIN POWER CORDGUARDING - WE DO NOT WARRANT THAT MANUFACTURERS›¼À™ GUARDING WILL MEET ALL LOCAL CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE GUARDING CHECKED BY A LOCAL INSPECTOR PRIOR TO STARTUP OF EQUIPMENT OPERATIONS CORRECTIVE ACTIONS AND ASSOCIATED EXPENSE ARE THE RESPONSIBILITY OF THE END USER
Photos
image
Zoom In Zoom Out Refresh

thumb   thumb   thumb  
hidden image
Say you saw this 2021 Other 7203-38OF On MachineryLot.com!
Contact Information
General Equipment & Supplies, Inc.
 
Sales Department
4300 Main Ave
PO Box 2145
Fargo, North Dakota 58103
USA
OFFICE CLICK TO VIEW FAX CLICK TO VIEW
TOLL FREE CLICK TO VIEW